> For AI agents: [llms.txt](https://docs.trustedauth.com/llms.txt) provides a Markdown index of this documentation.

# Keeper Security

Keeper Security provides a password protection tool for your organization. Keeper Security supports SSO for Managed Services Providers (MSP) to access Managed Services Center (MSC) without the need for a separate login. An SSO login validates usernames and passwords against your corporate user database that is protected by IDaaS. See <https://www.keepersecurity.com/>. You can protect access to Keeper Security by integrating Keeper Security with Identity as a Service. Once integrated, users can use single sign-on to log in to their Keeper Security account through Identity as a Service.

note

This integration was tested using Identity as a Service version 5.37 and Keeper Security 24.1.25. Other versions of Keeper Security may require integration and configuration steps that differ from those documented in this procedure. For other versions of Keeper Security, use this procedure as a starting point for integrating Keeper Security. In the event of other issues, contact <support@entrust.com> for assistance.

Before you begin, open two browser windows. In one window, log in to your Keeper Security administrator account. In the other window, log in to your IDaaS administrator account.

## Step 1: Configure single sign-on in Keeper Security for IDaaS

1. Log in to your Keeper Security administrator account. The **Keeper** page appears.
2. Click **Admin Console**. The **Getting Started** page appears.
3. Click **Admin**. The Node set up page appears.
4. Under **Node**, click Ellipsis Vertical icon and select **Add Node**. The **Add Node** dialog box appears.
5. Enter a **Name** for the Node, for example, IDaaS.
6. Click **Add Node**.
7. Click **Roles**. The **Roles** page appears.
8. Configure a User with a role with the required enforcement policies, if one does not already exist.
9. Click the **Provisioning** tab. The **User Provisioning** page appears.
10. Click **Add Method**. The **Select Provisioning Method** page appears.
11. From the **Node** drop-down list, select the Node you created in Step 6, above.
12. Select **Single Sign-On with SSO Connect On-Prem**.
13. Click **Next**. The **Single Sign-On with SSO Connect On-Prem** page appears.
14. Enter the **Enterprise Domain Name**. For example, mycompany.us.trustedauth.com.
15. Click **Next** to create the provisioning method. Your node appears under **Single Sign-On with SSO Connect Cloud** with a status of **Active**.
16. Click Ellipsis Vertical icon next to your **Node** and select **View**.
17. Click **Export Metadata** and save the metadata to use in _Step 2: Configure Security Keeper for Identity as a Service._
18. Click **<--** (back) to return to the **Single Sign-On with SSO Connect Cloud** page.
19. Leave this page open to return to in a later step.

## Step 2: Add Keeper Security to Identity as a Service

1. In Identity as a Service, click Menu icon **>** **Security > Applications**. The **Applications** **Lists** page appears.
2. Click **Add**. The **Select an Application Template** page appears.
3. Do one of the following:
   - Select **SAML Cloud Integrations** from the search drop-down list and scroll to find the application you want to add to IDaaS.
   - In the **Search bar**, enter a search option to filter for the application you want to add to IDaaS.
4. Click **Security Keeper**. The **Add Keeper Security** page appears.
5. Enter an **Application Name**.
6. Enter an **Application Description**.
7. Optional. Add a custom application logo.
   1. Click Plus icon next to **Application Logo**. The **Upload Logo** dialog box appears.
   2. Click Upload icon to select an image file to upload.
   3. Browse to select your file and click **Open**. The **Upload Logo** dialog box reappears showing your selected image.
   4. If required, resize your image.
   5. Click **OK**.
8. Select the **Authentication Flow** that appears to users during login.
9. Click **Next**. The **General** page appears.
10. **Click** **Upload Metadata XML** and browse to upload the metadata file you downloaded in _Step 1: Configure Keeper Security for single sign-on for IDaaS._
11. Enter the **SAML Session Timeout** to the time when the SAML Assertion times out. The maximum is 720 minutes.
12. Enter the **Max Authentication Age (seconds)** to set the maximum amount of time that can elapse before a user is required to reauthenticate during a new login attempt. This applies for both SP-initiated and IDP-initiated login. Set this field to -1 to disable this feature.
13. From the **SAML NameID Attribute** drop-down list, select **Email**.
14. From the **SAML NameID Encoding Format** drop-down list, select **Email**.
15. From the **SAML Signing Algorithm drop-down list**, select **SHA512**.
16. From the **SAML Signing Certificate** from the drop-down list, select the SAML Signing Certificate.
17. Optional: Select **Respond Immediately for Unsuccessful Responses** to return to the application immediately after a login failure, rather than allow user to try again with a different userID.
18. Deselect **Enable Go Back Button** if you do not want users to be able to go back to the Security Keeper login page to log in.
19. Add three **SAML Attributes**, as follows:
    1. Add the first name attribute, as follows:
       1. Click **Add**. The **Add Attribute** dialog box appears.
       2. In the **Name** field, enter **First**.
       3. In the **Value** field, type < and select First Name.
       4. Click **Add** to return to the **Add Application** page.
    2. Add the Last Name attribute, as follows:
       1. Under **SAML Attributes**, click **Add**.
       2. In the **Name** field, enter **Last**.
       3. In the **Value** field, < and select Last Name.
       4. Click **Add** to return to **Add Application** page.
    3. Add the Email attribute, as follows:
       1. Under **SAML Attributes**, click **Add**.
       2. In the **Name** field, enter **Email**.
       3. In the **Value** field, < and select Email.
       4. Click **Add** to return to **Add Application** page.
20. Leave the remaining settings at the default values.
21. Click **Submit**.

## Step 3: Add a resource rule

See [Create resource rules](/docs/authentication-and-security/create-and-manage-resource-rules.md).

## Step 4: Download the metadata file from Identity as a Service

1. In Identity as a Service, click Menu icon **>** **Security > Applications**. The **Applications List** page appears.

2. Do one of the following:

   - Click Cloud Download icon next to the application you are integrating with Identity as a Service.
   - Click Ellipsis Vertical icon next to the application you are integrating with Identity as a Service and select **SAML IDP Metadata**.

   The **SAML Application Metadata** dialog box appears.

3. **Select the certificate to include in the SAML IDP Metadata file** from the drop-down list.

4. If applicable, **Select the domain to include in the SAML IDP Metadata** file from the drop-down list.

5. Enter the **Lifetime, in days, for the SAML IDP Metadata file**. The value must be between 2 and 730.

6. Do one of the following, as required:

   - Copy the **Public Endpoint** to paste into your SAML application being used Identity Provider authentication.
   - Click **Download**.

note

If you are using multiple domains, you must download each domain's metadata file separately because the values in the metadata file vary for each domain.

## Step 5: Upload the metadata file from Identity as a Service

1. Return to the page you left open in _Step 1: Configure single sign-on in Keeper Security for IDaaS_.
2. Click Ellipsis Vertical icon next to your **Node** and select **Edit**. The **Identity Provider** page appears.
3. Scroll to **SAML Metadata**.
4. Upload the metadata file your downloaded from IDaaS in _Step 4: Download the metadata file from Identity as a Service_.
5. Click **Save**.

## Step 6: Test the integration

**Testing Service Provider Login**

1. Open a Web browser and enter the URL <https://login.Keeper> Security.com/login. You are directed to Identity as a Service.
2. Enter your Keeper Security account **User ID** and click **Next**.
3. Respond to the second-factor authentication challenge. If you respond successfully, you are logged in to the Keeper Security Console **Home** page.

**Testing Identity as a Service redirect log in**

1. Log in to your Identity as a Service account.
2. Go to your **My Profile** page if you are not already there.
3. Under **Applications**, click **Keeper Security SAML**.
4. Respond to the second-factor authentication challenge. If you respond successfully, you are logged in to Keeper Security Console **Home** page.